SCIFIT SXT7000 User Manual download pdf (Page 60)

CC. Keyed Spindle Crank / Bearing Replacement

1. Remove the TeleRails, using the TeleRail Removal procedure.

2. Remove the crank arms, using the Crank Arm Removal procedure. Do

not lose the keys when removing crank arms.

3. Mark the position of the flangettes (P1095) on the monocoque. Mark

flangettes in at least two (2) positions each.

4. Unhook the poly-v belt from the brake drive pulley (A1545).

5. Loosen the set screws on each bearing collar (P1096), using a 1/8” Allen

wrench. There are two (2) set screws on each bearing collar. On the

older ellipticals, the bearing collars faced toward the inside of the

monocoque. Newer units, the bearing collars faced toward the outside of

the monocoque.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65

No comments

SCIFIT SXT7000 User Manual Page 60