SCIFIT PRO2 User Manual download pdf (Page 28)

E. Lower PCB Replacement (Use this procedure for PROII’s with serial

numbers 650-005504 and above.)

1. Remove crank retaining bolts and washers, using a 5/32” Allen wrench.

2. On the lower right side crank hub assembly (A1871), pull the black knob

on the popper pin assembly (A1754) out and slide the crank assembly

(A1868) out.

3. On the upper right side crank hub assembly (A1884), pull the black knob

on the popper pin assembly and slide the crank assembly (A1870) out.

4. Remove the popper pin assembly by turning it counterclockwise with a

crescent wrench.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 38 39

No comments

SCIFIT PRO2 User Manual Page 28