SCIFIT PRO2 User Manual download pdf (Page 30)

F. Battery Replacement

1. Remove crank retaining bolts and washers, using a 5/32” Allen wrench.

2. On the lower right side crank hub assembly (A1871), pull the black knob

on the popper pin assembly (A1754) out and slide the crank assembly

(A1868) out.

3. On the upper right side crank hub assembly (A1884), pull the black knob

on the popper pin assembly and slide the crank assembly (A1870) out.

4. Remove the popper pin assembly by turning it counterclockwise with a

crescent wrench.

5. Remove the six (6) cover screws and washers holding the right side cover

in place, using a Philips screwdriver.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

No comments

SCIFIT PRO2 User Manual Page 30